the tolerance unless classified 0.3mm lcd option: stn, tn, fstn backlight option: led,el backlight feature, other specs not available on catalog is under request. outline dimension & block diagram pg 240128-a pg 240128-a mechanical specification overall size view area dot size dot pitch 144.0 x 104.0 114.0 x 64.0 0.40 x 0.40 0.45 x 0.45 module w /o b/l el b/l led / ccfl b/l h2 / h1 5.2 / 9.8 5.2 / 9.8 9.2 / 13.8 vdd+0.3 v v v 22.0 7.0 item supply for logic voltage lcd driving supply voltage input voltage vdd-vss vdd-vee vin 25 o c 25 o c 25 o c -0.3 0 -0.3 symbol condition min. max. units absolute maximum rating item lcd operation voltage lcm current consumption (no b/l) backlight current consumption symbol min. condition vop idd led/edge vb/l=3.5v led/array top -20 o c 0 o c 25 o c 50 o c 70 o c vb/l=4.2v n w 18.8 12.5 11.7 vdd=5v 10.9 16.1 17.2 electrical characteristics typical n w max. units v 13.7 12.9 11.9 20.8 19.1 17.7 v v v v v ma ma ma 35 n w 19.8 13.1 12.3 11.4 16.9 18.1 power supply voltage vdd-vss 25 o c 4.5 5.5 v 900 50 pin assignment pin no. symbol function 1 2 3 4 5 6 7-14 15 16 17 18 19 20 vss vdd vo c/d ce rst db0-db7 vee nc power supply(gnd) power supply(+) contrast adjust command / data select font selection chip enable reset data bus line negative output no connection fs1 select number of columns md2 data read rd data write wr db0~db7 vdd v o a k ce vss v ee reset fs1 t6963c backlight negative v oltage generator lcd p anel cr yst al 8 5 13 8 2 col sram 3 2 64 64 80 80 80 4 4 4 4 wr rd c d md2 col col com com 0.05 0.4 0.4 0.05 h1 104 0.5 h2 1.6 4- 3.0 p ad4- 7.0 4- 1.0 a k 240 x 128 dots 128.0 1 14.0 107.95 72.0 1 20 20- 1.0 p2.54 x 19=48.26 138.0 44.0 0.5 1.8 13.74 3.0 8.0 97.0 20.0 45.0 3.5 2.5 18.0 55.0 57.55 64.0 74.0 2.0 120
the tolerance unless classified 0.2mm outline dimension & block diagram digit al t ouch p anel digit al t ouch p anel 1 20 120.0 0.5 sw51 sw01 19.7 9.2 pitch9.6 x 9=86.4 105.0(v/a) sw60 sw10 95.6 126.0 10.7 6.0 r5c10 0.8 10.08 key la yout r5c1 pin 16 r1c1 13.03 10.0 95.0 0.3 107.95(a / a) 1 14.0(v / a) 131.0max (flex thickness) 0.3 1.5 pin1 r1c10 76.0max 64.0(v/a) 57.55(a/a) 6.0 9.23 0.8 10.87 15.0 17.0 29.5 (w=0.7,p1.0 x 15) 21.0 19.0 0.7 1 1.6 pitch12.0 x 0.5=60.0 71.6 80.0(v/a) 94.8 7.4 (p1.0 x 19) f or pg 240128-a/b f or pg 320240-c/e (flex thickness) 0.3 1.5
|